Staffing—Interim and Part-time

The biggest problems with the “traditional staffing” model is that you are responsible for:

  • Training the person to be functional
  • Managing their workload
  • Assessing the quality of their work

Plus, The typical “lone ranger” quality consultant is rarely good across all quality roles and may end up spending a good deal of their billable hours doing lower level tasks like document control or inspections.

Avoid these problems. Let CQG be your “managed services” staffing partner.

Tell us what you need and it’s done. Behind the scenes, your CQG Quality Team Lead allocates resources from a fully-trained quality department, on an as needed, fractional basis. The model automatically aligns the quality tasks with the right quality role, at the right rate.

Additionally we take full responsibility for training, managing, and assessing a high quality output.

CQG’s quality team can get up to speed more quickly, get the work done faster, and is virtually self-managing because we work in multiple quality roles, across multiple quality systems, within a wide spectrum of device classes, categories, and manufacturing styles every day. We understand your world and your needs better than the traditional staffing options.

Select Contact Us to schedule a conversation.

Our quality team has deep expertise in the following roles:

Management Rep
VP/DIR of Quality
Senior Quality Engineer
Quality Engineer
Software Quality
Document Control
Inspector
Supplier Control
Internal Auditor

Not Enough Work to Justify a Full-time Person?

Lots of times, as you grow, you do not have enough work to justify a full-time hire. What you really need is part-time support in multiple roles.

This puts you in the position of trying to find a “jack of all trades,” that rare one person who is really good across multiple quality roles. In addition to being hard to find, they are also expensive for the lower level quality roles.

With CQG’s “managed services” staffing model you don’t need to find that one rare bird. Instead, you have access to a fully-trained quality department which is allocated to you on an as needed, fractional basis.Allow Cannon Quality Group to implement a complete quality management system for your next product. To launch your product faster, call us now.

Select Contact Us to schedule a conversation.

Need Replacement Support?

Finding the right quality professional that fits your organization takes time. Finding someone that you can plug into your organization short-term with minimal impact to your system is hard. Most quality consultants want to change what you are doing versus help you maintain what you have. What you need while you are looking for that right person is help maintaining your current system, as it is.

Because CQG fundamentally doesn’t believe in a “one-size-fits-all” quality system, we don’t have a need to have you do it “our way.” We believe the best system is the one that works for you.

Additionally, our team members are agile and flexible because we work in multiple quality roles, across multiple quality systems, within a wide spectrum of device classes, categories, and manufacturing styles every day.

Select Contact Us to schedule a conversation.

Have a Work Load Spike?

Finding a competent consultant that can hit the road running can be challenging, but not with CQG’s “managed services” staffing model.

CQG’s quality team works in multiple roles, across multiple quality systems, within a wide spectrum of device classes, categories, and manufacturing styles every day.

We add value on day one.

Select Contact Us to schedule a conversation.

“When a key employee quit just as the load on my QA group exploded because of a clinical build, CQG stepped in immediately with the resources we needed to keep us going. I hope nothing like this ever happens to us again but, if it does, I’ll know exactly whom to call.”
– Ari Zak, Sr. VP, Clinical, Regulatory & Quality and Corporate Counsel
Testimonials

"My Manager reviewed and approved this validation, and he called me to say it would be the gold standard for spreadsheet validations for all Nordson Medical D&D sites from this point forward!"

-Kim Trottier/Quality Information Systems Manager, Nordson Medical

"Our notified body commented that he was impressed with the focus and professionalism of the Emboline team during a recent audit. This is largely a credit to the Cannon Quality Group team. Your team, as always, was extremely organized, well-prepared and professional. Thank you!"

-Scott Russell/President and CEO at Emboline, Inc.

"Everything about the audit process including scheduling, the audit itself, and results & follow-up were seamless and enabled LamaMed Solutions, Inc. to fulfill its requirements for Internal Audit and assessment of QMS conformance with ISO 13485:2016 in advance of our Notified Body audit."

-Lloyd Griese/Quality and Regulatory Consultant, LamaMed Solutions, Inc.

"Our SVP of QA/RA performs mock-FDA audits across all our global facilities. So it was huge compliment for us when, after reviewing all aspects of a software validation authored by Cannon Quality Group, he said it was as good a validation as he had ever seen."

-Ron Koronkowski/Director of Quality & Regulatory, Vention Medical, Inc.

"Cannon Quality Group's staff was highly engaged and responsive to our needs. They were easy to work with and provided a high-quality work product."

-Caroline Jewett/Consultant for PvP Biotech

"It was by far the best QSR/GMP training – high caliber content and engaging delivery."

-Robert Angelopoulos/Sr. Engineering Manager, Powervision, Inc.

"Don’t stress. Call Cannon Quality Group for great project support."

-David Freed/Sr. Quality Director, AcelRx Pharmaceuticals, Inc.

"My 3rd party ISO 13485:2016 audit was extremely beneficial to my company. The auditor was very knowledgeable about the standard and current trends that notified bodies are looking for."

-Tom Mason/Director QA, Vactronix Scientific

"When strategic partners were doing due diligence, I think they expected to find an empty drawer where the Quality Management System would be. We started showing them the procedures and design files that Cannon Quality Group helped us establish, and they were pleasantly surprised to get just what they wanted…The ability of…"

-Don Bogue/President/CEO, Compact Imaging

"Our [CQG] auditor provided findings with value-based explanations and implementation ideas."

-Kyle Dion/Quality Specialist, BlueLine Sterilization Services

"CQG has been with my organization from the nascent stages of our QMS.  Their team of experts coached us on the ISO standards, provided training classes, furnished sample QMS documentation, and were always quick to respond to our endless questions.  Most importantly they were present at our crucial certification and customer audits. …"

-Kathleen Perry/Twist Biosciences

"Working with Cannon was a pleasure. They helped us create our first formalized Quality Management System with just the right balance of rigor, detail-orientation, and practicality. I would definitely work with Cannon again in the future on quality management projects."

-Gideon Wald/CTO Welkin Health

"JenaValve would like to extend a very appreciated “Thank You” to the whole Cannon Group team in supporting us, JenaValve, through the quality system improvements and associated activities. Your organization has been exceptional in supporting the chaotic schedule and the Cannon Group team members have performed above and beyond the…"

-Peter Wulff/CFO JenaValve

"Your team is great, love the maturity level. Great respect from Quality & Regulatory."

-Mark Adler/Senior Director of R&D JenaValve

"CQG has really shattered my preconceptions of what contracted support can do for a quality system. They are true professionals from the advice they provide, work they produce, and the integrity of actions. From complicated design control issues, to Process Validation, to Doc Control, they have been a huge resource…"

-David Hesting/QA Director, Profusa, Inc.

"Amy has done an amazing job here and we appreciate all her help. Communication with everyone/doc control is good/responsive, and we especially appreciate the quick turnaround on hot DCO’s – they find everything."

-Bijesh Chandran/VP of Quality, R2 Dermatology

"Cannon Quality Group is an absolute pleasure. For our startup, CQG made QSR development and compliance enjoyable and easy. Their unique style and system has allowed us to work at the fast pace required by the market, while still maintaining regulatory compliance."

-Andrew Hosford/Director of Engineering, Gauss Surgical

"Our startup was working with a skeleton quality system and struggling to apply QSR standards, when we brought in the Cannon Quality Group. They overhauled and sharpened our quality system so that it complied with the QSR, in only a few months, which allowed us to have a flawless audit.…"

-CQG client/

"When a key employee quit just as the load on my QA group exploded because of a clinical build, CQG stepped in immediately with the resources we needed to keep us going. I hope nothing like this ever happens to us again but, if it does, I’ll know exactly whom…"

-Ari Zak/Sr. VP, Clinical, Regulatory & Quality and Corporate Counsel, PowerVision

"Prior to CQG, our startup worked with another company which made quality slow, very expensive, and highly frustrating. Comparatively, CQG has been a game changer for our company. They have made QSR development and compliance enjoyable and easy, which has allowed us to work at the fast pace required by…"

-CQG Client/

"Kudos to the Cannon Quality Group for helping us get through our FDA audit with zero 483s and just a few CAPAs.Their expertise in quickly turning our bare bones QMS into a robust system is exactly what was needed."

-Shaun R. Bagai/CEO – RenovoRx, Inc.

"Pete is awesome, I appreciate the help he provides to our team and his assistance in various quality needs."

-Kityee Au-Yeung/Profusa

"As a new Quality Director at a young start-up company, I am happy to leave a recommendation for Cannon Quality Group. Cannon Quality Group has an innovative and efficient process in place to bring a working Quality System to a start-up company in a short amount of time. Cannon retains…"

-Delane Dale/Quality Director – BioInspire Technologies
Need a Controlled Environment?
/* */